Tube Fittings
RJT Weld Liner Single Swaged Hosetail
RJT Weld Liner Single Swaged Hosetail
Features
- Pre-Welded with a RJT Weld Liner
- RJT Hex Nuts and Slotted Nuts sold seperately
You need to have a trade account with us to download CAD files.
Related Products
-
Square Footplates
Square Footplates
Features
- Rectangular Footplates also available
- Great for use on leg base of frameworks
View DimensionsYou need to have a trade account with us to download CAD files.
-
Tube Barbed Hosetail
Tube Barbed Hosetail
Features
- Butt-Welds to Imperial Sized Tube
View Dimensions
You need to have a trade account with us to download CAD files.
-
Tube Bend 180°
AS1528.3
Tube Bend 180°
AS1528.3
Features
- Manufactured to AS1528.3 Standard
- 320 Grit Finish
View Dimensions
You need to have a trade account with us to download CAD files.
-
Tube Equal Tee
AS1528.3
Tube Equal Tee
AS1528.3
Features
- Manufactured to AS1528.3 Standard
- 320 Grit Finish
View Dimensions
You need to have a trade account with us to download CAD files.
-
Dairy Tube
AS 1528.1
Dairy Tube
AS 1528.1
Features
- Manufactured to AS 1528.1 Standard
- 320 Grit External Surface Finish
- 6 metre lengths. Purchase per metre (enter quantity as '6' for 1 length)
View Dimensions
You need to have a trade account with us to download CAD files.
-
Short Radius Tube Bend 90°
Short Radius Tube Bend 90°
Features
- Short Radius (1.5x Diameter)
- 320 Grit Finish
View Dimensions
You need to have a trade account with us to download CAD files.
-
Round Tube Flat Cap
Round Tube Flat Cap
Features
- Perfect for blanking the end of tube
- The size of our Round Tube Flat Caps are 1x Wall Thickness smaller than the size of the tube for easy installation
View Dimensions
You need to have a trade account with us to download CAD files.
-
General Purpose Tube
ASTM A554
General Purpose Tube
ASTM A554
Features
- Manufactured to ASTM A554 Standard
- 320 Grit Finish
- 6 metre lengths = Purchase per metre (enter quantity as '6' for 1 length), 5.8 metre lengths = Purchase per length (enter quantity as '1' for 1 length) ...
- Also known as Handrail Tube, Ornamental Tube and Architectural Tube
View Dimensions
You need to have a trade account with us to download CAD files.
-
Rectangle Footplates
Rectangle Footplates
Features
- Square Footplates also available
- Great for use on leg base of frameworks
View DimensionsYou need to have a trade account with us to download CAD files.
-
Round Tube Dome Cap
Round Tube Dome Cap
Features
- Perfect for use on handrail
- 2B Finish
View Dimensions
You need to have a trade account with us to download CAD files.
-
Tube Swept Tee
Tube Swept Tee
Features
- Made in New Zealand
- 120 Grit Finish
View Dimensions
You need to have a trade account with us to download CAD files.
-
Double Ended Barbed Hosetail
Double Ended Barbed Hosetail
Features
- Double ended for joining two hose lines
View Dimensions
You need to have a trade account with us to download CAD files.
-
Medium Radius Tube Bend 90°
AS1528.3
Medium Radius Tube Bend 90°
AS1528.3
Features
- Medium Radius (1.5x Diameter, with Straight Legs) - UNI
- Manufactured to AS1528.3 Standard
- 320 Grit Finish
View Dimensions
You need to have a trade account with us to download CAD files.
-
Round Tube Pressed End Cap
Round Tube Pressed End Cap
Features
- Perfect for capping off the end of tube
View Dimensions
You need to have a trade account with us to download CAD files.
-
Tube Bend 45°
AS1528.3
Tube Bend 45°
AS1528.3
Features
- Manufactured to AS1528.3 Standard
- 320 Grit Finish
View Dimensions
You need to have a trade account with us to download CAD files.
-
Long Radius Tube Bend 90°
Long Radius Tube Bend 90°
Features
- Long Radius
- 320 Grit Finish
View Dimensions
You need to have a trade account with us to download CAD files.
-
Tube Single Swaged Hosetail
Tube Single Swaged Hosetail
Features
- Butt-Welds to Imperial Sized Tube
View Dimensions
You need to have a trade account with us to download CAD files.
-
Square Tube Flat Cap
Square Tube Flat Cap
Features
- Perfect for blanking the end of tube
- The size of our Square Tube Flat Caps are 1x Wall Thickness smaller than the size of the tube for easy installation
View Dimensions
You need to have a trade account with us to download CAD files.
-
Tube Pulled Tee
AS1528.3
Tube Pulled Tee
AS1528.3
Features
- Manufactured to AS1528.3 Standard (*)
- 320 Grit Finish
- (*) 5" to 8" exceed AS1528.3 Standard center leg length
View Dimensions
You need to have a trade account with us to download CAD files.
-
BSP Male Single Swaged Hosetail
BSP Male Single Swaged Hosetail
Features
- Pre-Welded with a BSP Nipple Adapter
- Tapered BSP Thread (ISO 7-1/ISO 228-1)
View Dimensions
You need to have a trade account with us to download CAD files.
-
Tube Reducing Tee
Tube Reducing Tee
Features
- 320 Grit Finish
View Dimensions
You need to have a trade account with us to download CAD files.
-
BSP Weld Nipple Adapter
BSP Weld Nipple Adapter
Features
- BSP Threaded End
- Butt Welds To Outside Diameter Tube Sizes
- Flat Spots For Ease Of Tightening ...
- BSP thread conforms with ISO 7-1/ISO 228-1
- Male Threads are Tapered (BSPT)
- Working Pressure: 10 bar / 150 PSI (for pressures higher than this, please enquire)
- Working Temperature: 250°C at 10 bar / 150 PSI
View Dimensions
You need to have a trade account with us to download CAD files.
-
Tube Equal 'Y' Tee
Tube Equal 'Y' Tee
Features
- 320 Grit Finish
View Dimensions
You need to have a trade account with us to download CAD files.
-
Tube Concentric Reducer
AS1528.3
Tube Concentric Reducer
AS1528.3
Features
- Manufactured to AS1528.3 Standard
- 320 Grit Finish
- Please note: 203.2 (8") sizes have different lengths than specified in AS1528.3 and are considered non-standard. Please check dimension 'C' for details
View Dimensions
You need to have a trade account with us to download CAD files.
-
Tube Equal Cross
AS1528.3
Tube Equal Cross
AS1528.3
Features
- Manufactured to AS1528.3 Standard
- 320 Grit Finish
- Please Note: 63.5 mm (2 1/2") does not match dimensions outlined in AS1528.3. New stock is set to replace the current stock and will be to AS1528.3 dimensions
View Dimensions
You need to have a trade account with us to download CAD files.
-
Square Tube
ASTM A554
Square Tube
ASTM A554
Features
- Manufactured to ASTM A554 Standard
- 180 Grit Finish
- 6 metre lengths. Purchase per metre (enter quantity as '6' for 1 length) ...
- Also known as "Box Section"
View Dimensions
You need to have a trade account with us to download CAD files.
-
Rectangle Tube
ASTM A554
Rectangle Tube
ASTM A554
Features
- Manufactured to ASTM A554 Standard
- 180 Grit Finish
- 6 metre lengths. Purchase per metre (enter quantity as '6' for 1 length)
View Dimensions
You need to have a trade account with us to download CAD files.
-
Tube Neck Ring
EN1092-1 Type 33
Tube Neck Ring
EN1092-1 Type 33
Features
- To suit Imperial Sized Tube in conjunction with a Backing Ring
- Pressed from Sheet
View Dimensions
You need to have a trade account with us to download CAD files.
-
BSP Weld Socket Adapter
BSP Weld Socket Adapter
Features
- BSP Threaded End
- Butt Welds To Outside Diameter Tube Sizes
- Flat Spots For Ease Of Tightening ...
- BSP thread conforms with ISO 7-1/ISO 228-1
- Female Threads are Parallel (BSPP)
- Working Pressure: 10 bar / 150 PSI (for pressures higher than this, please enquire)
- Working Temperature: 250°C at 10 bar / 150 PSI
View Dimensions
You need to have a trade account with us to download CAD files.
-
RJT Concentric Reducer
RJT Concentric Reducer
Features
- 320 Grit Finish
- Pre-Welded with RJT Connections
- RJT Male Part = Smaller Diameter End ...
- RJT Weld Liner & Hex Nut = Larger Diameter End
View Dimensions
You need to have a trade account with us to download CAD files.
-
Tri Clover Concentric Reducer
Tri Clover Concentric Reducer
Features
- 320 Grit Finish
- Pre-Welded with Tri Clover Ferrule Connections
View Dimensions
You need to have a trade account with us to download CAD files.
-
Tube Eccentric Reducer
AS1528.3
Tube Eccentric Reducer
AS1528.3
Features
- Manufactured to AS1528.3 Standard
- 320 Grit Finish
- Please note: 203.2 (8") sizes have different lengths than specified in AS1528.3 and are considered non-standard. Please check dimension 'C' for details
View Dimensions
You need to have a trade account with us to download CAD files.
-
Short Radius Tri Clover Bend 90°
Short Radius Tri Clover Bend 90°
Features
- Short Radius (1.5x Diameter)
- 320 Grit Finish
- Pre-Welded with Tri Clover Ferrules
View Dimensions
You need to have a trade account with us to download CAD files.
-
Tri Clover Bend 45°
Tri Clover Bend 45°
Features
- 320 Grit Finish
- Pre-Welded with Tri Clover Ferrule Connections
View Dimensions
You need to have a trade account with us to download CAD files.
-
Short Radius RJT Bend 90°
Short Radius RJT Bend 90°
Features
- Short Radius (1.5x Diameter)
- 320 Grit Finish
- Pre-Welded with RJT Male Part & Weld Liner/Hex Nut Connections
View Dimensions
You need to have a trade account with us to download CAD files.
-
RJT Equal Tee
RJT Equal Tee
Features
- 320 Grit Finish
- Pre-Welded with RJT Connections
- Male Part / Male Part / Weld Liner & Hex Nut Orientation
View Dimensions
You need to have a trade account with us to download CAD files.
-
Tri Clover Equal Tee
Tri Clover Equal Tee
Features
- 320 Grit Finish
- Pre-Welded with Tri Clover Ferrule Connections
View Dimensions
You need to have a trade account with us to download CAD files.
-
RJT Male Single Swaged Hosetail
RJT Male Single Swaged Hosetail
Features
- Pre-Welded with a RJT Male Part
View Dimensions
You need to have a trade account with us to download CAD files.
-
Tri Clover Single Swaged Hosetail
Tri Clover Single Swaged Hosetail
Features
- Pre-Welded with a Tri Clover Ferrule
View Dimensions
You need to have a trade account with us to download CAD files.
-
Tube Double Swaged Hosetail
Tube Double Swaged Hosetail
Features
- Butt-Welds to Imperial Sized Tube
View DimensionsYou need to have a trade account with us to download CAD files.
-
RJT Weld Liner Double Swaged Hosetail
RJT Weld Liner Double Swaged Hosetail
Features
- Pre-Welded with a RJT Weld Liner
- RJT Hex Nuts and Slotted Nuts sold seperately
View DimensionsYou need to have a trade account with us to download CAD files.
