Seismic Loops
FlexiFlow 'U' Loops
-
FlexiFlow Seismic 'U' Loop w/ Imperial Tube Ends
FlexiFlow Seismic 'U' Loop w/ Imperial Tube Ends
Features
- Butt Weld Ends (Imperial Tube)
- Measurement 'E' = Deflection (all directions, per side)
- Lifting/Cable Lug can be added on request ...
- 8mm Round Bar temporarily installed (tack welded) for shipping and for maintaining alignment during installations
- Pressure/Temperature rating applies to hose only, not end connections
- Please allow 2-3 days lead-time for fabrication
View Dimensions
-
FlexiFlow Seismic 'U' Loop w/ BSP Floating Nuts
FlexiFlow Seismic 'U' Loop w/ BSP Floating Nuts
Features
- BSP Floating Nut End Connections (with 60° conical face)
- Measurement 'F' = Deflection (all directions, per side)
- Lifting/Cable Lug can be added on request ...
- 8mm Round Bar temporarily installed (tack welded) for shipping and for maintaining alignment during installations
- Pressure/Temperature rating applies to hose only, not end connections
- Please allow 2-3 days lead-time for fabrication
View Dimensions
-
FlexiFlow Seismic 'U' Loop w/ RJT Connections
FlexiFlow Seismic 'U' Loop w/ RJT Connections
Features
- RJT Male Part & Weld Liner/Hex Nut End Connections
- Measurement 'E' = Deflection (all directions, per side)
- Lifting/Cable Lug can be added on request ...
- 8mm Round Bar temporarily installed (tack welded) for shipping and for maintaining alignment during installations
- Pressure/Temperature rating applies to hose only, not end connections
- Please allow 2-3 days lead-time for fabrication
View Dimensions
-
FlexiFlow Seismic 'U' Loop w/ Tri Clover Ferrules
FlexiFlow Seismic 'U' Loop w/ Tri Clover Ferrules
Features
- Tri Clover Ferrule End Connections
- Measurement 'E' = Deflection (all directions, per side)
- Lifting/Cable Lug can be added on request ...
- 8mm Round Bar temporarily installed (tack welded) for shipping and for maintaining alignment during installations
- Pressure/Temperature rating applies to hose only, not end connections
- Please allow 2-3 days lead-time for fabrication
View Dimensions
-
FlexiFlow Seismic 'U' Loop w/ RapidPress Couplers
FlexiFlow Seismic 'U' Loop w/ RapidPress Couplers
Features
- RapidPress Coupler End Connections (EPDM Seals)
- Measurement 'F' = Deflection (all directions, per side)
- Lifting/Cable Lug can be added on request ...
- 8mm Round Bar temporarily installed (tack welded) for shipping and for maintaining alignment during installations
- Pressure/Temperature rating applies to hose only, not end connections
- Please allow 2-3 days lead-time for fabrication
View Dimensions
-
FlexiFlow Seismic 'U' Loop w/ RapidPress Extreme Couplers
FlexiFlow Seismic 'U' Loop w/ RapidPress Extreme Couplers
Features
- RapidPress Extreme Coupler End Connections (FKM Seals)
- Measurement 'F' = Deflection (all directions, per side)
- Lifting/Cable Lug can be added on request ...
- 8mm Round Bar temporarily installed (tack welded) for shipping and for maintaining alignment during installations
- Pressure/Temperature rating applies to hose only, not end connections
- Please allow 2-3 days lead-time for fabrication
View Dimensions
-
FlexiFlow Seismic 'U' Loop w/ Schedule 10S Pipe Ends
FlexiFlow Seismic 'U' Loop w/ Schedule 10S Pipe Ends
Features
- Butt Weld Ends (Schedule 10S Pipe)
- Measurement 'E' = Deflection (all directions, per side)
- Lifting/Cable Lug can be added on request ...
- 8mm Round Bar temporarily installed (tack welded) for shipping and for maintaining alignment during installations
- Pressure/Temperature rating applies to hose only, not end connections
- Please allow 2-3 days lead-time for fabrication
View Dimensions
-
FlexiFlow Seismic 'U' Loop w/ Floating Table E Flanges
FlexiFlow Seismic 'U' Loop w/ Floating Table E Flanges
Features
- Table E Floating Flange End Connections (AS2129 Bolt Pattern Only)
- Measurement 'E' = Deflection (all directions, per side)
- Lifting/Cable Lug can be added on request ...
- 8mm Round Bar temporarily installed (tack welded) for shipping and for maintaining alignment during installations
- Pressure/Temperature rating applies to hose only, not end connections
- Please allow 2-3 days lead-time for fabrication
View Dimensions
-
FlexiFlow Seismic 'U' Loop w/ Floating PN10-16 Flanges
FlexiFlow Seismic 'U' Loop w/ Floating PN10-16 Flanges
Features
- PN10-16 Floating Flange End Connections (EN1092-1 Bolt Pattern Only)
- Measurement 'E' = Deflection (all directions, per side)
- Lifting/Cable Lug can be added on request ...
- 8mm Round Bar temporarily installed (tack welded) for shipping and for maintaining alignment during installations
- Pressure/Temperature rating applies to hose only, not end connections
- Please allow 2-3 days lead-time for fabrication
View Dimensions
-
FlexiFlow Seismic 'U' Loop w/ Floating ANSI 150 Flanges
FlexiFlow Seismic 'U' Loop w/ Floating ANSI 150 Flanges
Features
- ANSI 150 Floating Flange End Connections (ASME B16.5 Bolt Pattern Only)
- Measurement 'E' = Deflection (all directions, per side)
- Lifting/Cable Lug can be added on request ...
- 8mm Round Bar temporarily installed (tack welded) for shipping and for maintaining alignment during installations
- Pressure/Temperature rating applies to hose only, not end connections
- **Please allow 2-3 days lead-time for fabrication**
View Dimensions
FlexiFlow 'V' Loops
-
FlexiFlow Seismic 'V' Loop w/ Imperial Tube Ends
FlexiFlow Seismic 'V' Loop w/ Imperial Tube Ends
Features
- Butt Weld Ends (Imperial Tube)
- Measurement 'D' = Deflection (all directions, per side)
- Lifting/Cable Lug can be added on request ...
- 8mm Round Bar temporarily installed (tack welded) for shipping and for maintaining alignment during installations
- Pressure/Temperature rating applies to hose only, not end connections
- Please allow 2-3 days lead-time for fabrication
View Dimensions
-
FlexiFlow Seismic 'V' Loop w/ BSP Floating Nuts
FlexiFlow Seismic 'V' Loop w/ BSP Floating Nuts
Features
- BSP Floating Nut End Connections (with 60° conical face)
- Measurement 'E' = Deflection (all directions, per side)
- Lifting/Cable Lug can be added on request ...
- 8mm Round Bar temporarily installed (tack welded) for shipping and for maintaining alignment during installations
- Pressure/Temperature rating applies to hose only, not end connections
- Please allow 2-3 days lead-time for fabrication
View Dimensions
-
FlexiFlow Seismic 'V' Loop w/ RJT Connections
FlexiFlow Seismic 'V' Loop w/ RJT Connections
Features
- RJT Male Part & Weld Liner/Hex Nut End Connections
- Measurement 'D' = Deflection (all directions, per side)
- Lifting/Cable Lug can be added on request ...
- 8mm Round Bar temporarily installed (tack welded) for shipping and for maintaining alignment during installations
- Pressure/Temperature rating applies to hose only, not end connections
- Please allow 2-3 days lead-time for fabrication
View Dimensions
-
FlexiFlow Seismic 'V' Loop w/ Tri Clover Ferrules
FlexiFlow Seismic 'V' Loop w/ Tri Clover Ferrules
Features
- Tri Clover Ferrule End Connections
- Measurement 'D' = Deflection (all directions, per side)
- Lifting/Cable Lug can be added on request ...
- 8mm Round Bar temporarily installed (tack welded) for shipping and for maintaining alignment during installations
- Pressure/Temperature rating applies to hose only, not end connections
- Please allow 2-3 days lead-time for fabrication
View Dimensions
-
FlexiFlow Seismic 'V' Loop w/ RapidPress Couplers
FlexiFlow Seismic 'V' Loop w/ RapidPress Couplers
Features
- RapidPress Coupler End Connections (EPDM Seals)
- Measurement 'E' = Deflection (all directions, per side)
- Lifting/Cable Lug can be added on request ...
- 8mm Round Bar temporarily installed (tack welded) for shipping and for maintaining alignment during installations
- Pressure/Temperature rating applies to hose only, not end connections
- Please allow 2-3 days lead-time for fabrication
View Dimensions
-
FlexiFlow Seismic 'V' Loop w/ RapidPress Extreme Couplers
FlexiFlow Seismic 'V' Loop w/ RapidPress Extreme Couplers
Features
- RapidPress Extreme Coupler End Connections (FKM Seals)
- Measurement 'E' = Deflection (all directions, per side)
- Lifting/Cable Lug can be added on request ...
- 8mm Round Bar temporarily installed (tack welded) for shipping and for maintaining alignment during installations
- Pressure/Temperature rating applies to hose only, not end connections
- Please allow 2-3 days lead-time for fabrication
View Dimensions
-
FlexiFlow Seismic 'V' Loop w/ Schedule 10S Pipe Ends
FlexiFlow Seismic 'V' Loop w/ Schedule 10S Pipe Ends
Features
- Butt Weld Ends (Schedule 10S Pipe)
- Measurement 'D' = Deflection (all directions, per side)
- Lifting/Cable Lug can be added on request ...
- 8mm Round Bar temporarily installed (tack welded) for shipping and for maintaining alignment during installations
- Pressure/Temperature rating applies to hose only, not end connections
- Please allow 2-3 days lead-time for fabrication
View Dimensions
-
FlexiFlow Seismic 'V' Loop w/ Floating Table E Flanges
FlexiFlow Seismic 'V' Loop w/ Floating Table E Flanges
Features
- Table E Floating Flange End Connections (AS2129 Bolt Pattern Only)
- Measurement 'D' = Deflection (all directions, per side)
- Lifting/Cable Lug can be added on request ...
- 8mm Round Bar temporarily installed (tack welded) for shipping and for maintaining alignment during installations
- Pressure/Temperature rating applies to hose only, not end connections
- Please allow 2-3 days lead-time for fabrication
View Dimensions
-
FlexiFlow Seismic 'V' Loop w/ Floating PN10-16 Flanges
FlexiFlow Seismic 'V' Loop w/ Floating PN10-16 Flanges
Features
- PN10-16 Floating Flange End Connections (EN1092-1 Bolt Pattern Only)
- Measurement 'D' = Deflection (all directions, per side)
- Lifting/Cable Lug can be added on request ...
- 8mm Round Bar temporarily installed (tack welded) for shipping and for maintaining alignment during installations
- Pressure/Temperature rating applies to hose only, not end connections
- Please allow 2-3 days lead-time for fabrication
View Dimensions
-
FlexiFlow Seismic 'V' Loop w/ Floating ANSI 150 Flanges
FlexiFlow Seismic 'V' Loop w/ Floating ANSI 150 Flanges
Features
- ANSI 150 Floating Flange End Connections (ASME B16.5 Bolt Pattern Only)
- Measurement 'D' = Deflection (all directions, per side)
- Lifting/Cable Lug can be added on request ...
- 8mm Round Bar temporarily installed (tack welded) for shipping and for maintaining alignment during installations
- Pressure/Temperature rating applies to hose only, not end connections
- Please allow 2-3 days lead-time for fabrication
View Dimensions
