About EPDM Rubber Seals

Operating temperature Min/Max degrees centigrade: -20* / +120 °C

 

Operating pressure maximum in bar: 16

 

Fields of application: Potable Water Heating, Cooling and Refrigeration, Circuits Treated Water, Desalinated Water, Rainwater Compressed Air (Classes 1-4)

 

Other Titles: Ethylene Propylene Diene Monomer

 

Ethylene Propylene Diene Monomer (EPDM) is a long-lasting synthetic rubber which is suitable for hot water, steam, alcohols, coolants, acids and bases. It is not resistant to mineral oils, greases or fuels. EPDM seals are used for flexibility, good insulation properties and the general temperature range of -20°C and +120°C.

 

The black EPDM sealing ring from ø 15 – 54 mm is supplied with an additional safety feature that during pressure tests will lead to leakage in the case of accidentally unpressed connections.

 

The Metal Company use black EPDM rubber for standard seals on stainless steel and carbon steel press fit fittings, standard seals for BSP threaded Mac Unions and standard seals for Tri Clover unions. Green EPDM Rubber is used as chemical-resistant seals for RJT stepped seals. EPDM is used for a range of valve seals including Mini Ball Valves, Sanitary Non-Return Valves, AE Series Butterfly Valves, Sanitary Ball Valves and Inline Non-Return Valves.

Operating temperature Min/Max degrees centigrade: -20* / +120 °C

 

Operating pressure maximum in bar: 16

 

Fields of application: Potable Water Heating, Cooling and Refrigeration, Circuits Treated Water, Desalinated Water, Rainwater Compressed Air (Classes 1-4)

 

Other Titles: Ethylene Propylene Diene Monomer

 

Ethylene Propylene Diene Monomer (EPDM) is a long-lasting synthetic rubber which is suitable for hot water, steam, alcohols, coolants, acids and bases. It is not resistant to mineral oils, greases or fuels. EPDM seals are used for flexibility, good insulation properties and the general temperature range of -20°C and +120°C.

 

The black EPDM sealing ring from ø 15 – 54 mm is supplied with an additional safety feature that during pressure tests will lead to leakage in the case of accidentally unpressed connections.

 

The Metal Company use black EPDM rubber for standard seals on stainless steel and carbon steel press fit fittings, standard seals for BSP threaded Mac Unions and standard seals for Tri Clover unions. Green EPDM Rubber is used as chemical-resistant seals for RJT stepped seals. EPDM is used for a range of valve seals including Mini Ball Valves, Sanitary Non-Return Valves, E Series Butterfly Valves, Sanitary Ball Valves and Inline Non-Return Valves.

Reset Password

LOOKING FOR TRADE DISCOUNTS?
OR Sign in below ▼

Reset Password

LOOKING FOR TRADE DISCOUNTS?
OR Sign in below ▼