fbpx

SIZES | 1/2" - 4"
SIZES | 1/2" - 4"
CLAMPS VS. SADDLES
WHAT ARE THE DIFFERENCES?
Watch Jay discuss below:
PLAIN
BOSSED
COLLARED
STUBBED
ACCESSORIES
CLAMP
SIZES | 3/4" - 4"
SADDLE
SIZES | 1/2" - 16"
SADDLE
CLAMP
SADDLE
CLAMP
CLAMP
SIZES | 3/4" - 4"
SIZES | 6" - 8"
SIZES | 1 /2" - 6"
SIZES | 3/4" - 4"
SIZES | 1" - 4"
Plain clamps are supplied ready to have a stub welded on in place. This allows engineers to rigidly weld different lengths and thicknesses of round bar depending on the application.
Bossed clamps and saddles feature a 10mm metric female threaded boss in the centre of the clamp. The boss allows pipework to be secured to a surgace by threading 10mm metric threaded rod to a bossed wall plate.
Collared clamps and saddles allow a 5/8” or 16mm round bar to be fitted inside a collar and secured by tightening the bolt on one side. This clamp allows for quick and easy removal if needed.
Stubbed clamps and saddles have 16mm stainless steel round bar stub which stands 50mm from the outside of the tube (the stub itself is 47mm long). Designed to save you time and labour on site.
The Metal Company also supply wall plates and accessories to support the structure of pipework. • Round diamond wall plates: threaded welded or collared to your clamps • Stainless threaded rod and pre-cut threaded rod stubbs
ROUND WALL PLATE
Plain and bossed
DIAMOND WALL PLATE
Plain, bossed and collared
M10 THREADED ROD
1M length or pre cut stubs 50 - 150mm
WHAT ARE THE DIFFERENCES?
CLAMPS VS. SADDLES
Watch Jay discuss below
Plain clamps are supplied ready to have a stub welded on in place. This allows engineers to rigidly weld different lengths and thicknesses of round bar depending on the application.
BOSSED
Bossed clamps and saddles feature a 10mm metric female threaded boss in the centre of the clamp. The boss allows pipework to be secured to a surface by threading 10mm metric threaded rod to a bossed wall plate.
STUBBED
ACCESSORIES
COLLARED
CLAMP
SIZES | 3/4" - 4"
SADDLE
SIZES | 1/2" - 16"
CLAMP
CLAMP
SIZES | 1" - 4"
SIZES | 3/4" - 4"
SADDLE
SIZES | 6" - 8"
Stubbed clamps and saddles have 16mm stainless steel round bar stub which stands 50mm from the outside of the tube (the stub itself is 47mm long). Designed to save time and labour on site.
Collared clamps and saddles allow a 5/8" or 16mm round bar to be fitted inside a collar and secured by tightening the bolt on one side. This clamp allows for quick and easy removal if needed.
The Metal Company also supply wall plates and accessories to support the structure of pipework. - Round diamond wall plates: threaded. welded or collared to your clamps. - Stainless threaded rod and pre-cut threaded rob stubs.
CLAMP
SADDLE
SIZES | 1/2" - 6"
SIZES | 3/4" - 4"
PLAIN

Please contact The Metal Company to change your email address. Request change.