RapidPress Inox Extreme Press-Fit System
RapidPress Extreme Bend 45°
RapidPress Extreme Bend 45°
Features
- FKM Seals
- Temperature rating: -20°C, 220°C
- Maximum operating pressure: 16 Bar (232psi)
- Gas Rated and RapidPress Extreme options available
Related Products
-
RapidPress Plain Clamp
RapidPress Plain Clamp
Features
- To suit RapidPress tube
- Includes Stainless Steel Metric Fasteners
View Dimensions
-
RapidPress Pressing Tool Case
RapidPress Pressing Tool Case
Features
- RapidPress Pressing Tool Case for ACO203 & ACO203XL Pressing Tools
View Dimensions -
RapidPress O-Ring FKM Seal
RapidPress O-Ring FKM Seal
Features
- FKM O-Ring - Green
- Typically used with Compresed Air & Oils
- Patented seal ring with lenticular profile which fits the press crimp groove which provides a 20% enlargement of the sealing surface ...
- Fit makes the pipes insertion easier
View Dimensions
-
RapidPress Extreme Bend 90°
RapidPress Extreme Bend 90°
Features
- FKM Seals
- Temperature rating: -20°C, 220°C
- Maximum operating pressure: 16 Bar (232psi)...
- EPDM and Gas Rated options available
View Dimensions
-
RapidPress Startup Kit
RapidPress Startup Kit
Features
- Kit inlcudes:
- Orbital Tube Cutter, Deburrer, Depth Gauge and our RapidPress Technical Manual.
-
RapidPress Extreme Union
RapidPress Extreme Union
Features
- FKM Seals
- Temperature rating: -20°C, 220°C
- Maximum operating pressure: 16 Bar (232psi)...
- EPDM options available
View Dimensions
-
RapidPress Extreme Coupler
RapidPress Extreme Coupler
Features
- FKM Seals
- Temperature rating: -20°C, 220°C
- Maximum operating pressure: 16 Bar (232psi)...
- EPDM and Gas Rated options available
View Dimensions
-
RapidPress ACO203 Complete Set 15-54
RapidPress ACO203 Complete Set 15-54
Features
- Tool comes with full set of compatible pressing heads
- Press sizes from 15.0mm to 54.0mm
- Work light for safe working ...
- Analysis of tool performance via NovoCheck app
- Data transfer via Bluetooth®
- Brushless Motor Technology
- Runs Milwaukee® M18™ Battery
View Dimensions
-
RapidPress ACO203XL Complete Set 15-108
RapidPress ACO203XL Complete Set 15-108
Features
- Tool comes with full set of compatible Pressing Heads (excludes 88.9mm Pressing Head)
- Press sizes from 15.0mm to 108.0mm
- Rotatable head ...
- Analysis of tool performance via NovoCheck app
- Data transfer via Bluetooth®
- Brushless Motor Technology
- Runs Milwaukee® M18™ Battery
View Dimensions
-
RapidPress Extreme End Cap
RapidPress Extreme End Cap
Features
- FKM Seal
- Temperature rating: -20°C, 220°C
- Maximum operating pressure: 16 Bar (232psi)...
- EPDM and Gas Rated options available
View Dimensions
-
RapidPress Extreme Equal Tee
RapidPress Extreme Equal Tee
Features
- FKM Seals
- Temperature rating: -20°C, 220°C
- Maximum operating pressure: 16 Bar (232psi)...
- EPDM and Gas Rated options available
View Dimensions
-
RapidPress ACO203XL 15-108 Tool
RapidPress ACO203XL 15-108 Tool
Features
- *Tool, Battery, Charger and Case only*
- Press sizes from 15.0mm to 108.0mm
- Rotatable head ...
- Analysis of tool performance via NovoCheck app
- Data transfer via Bluetooth®
- Brushless Motor Technology
- Runs Milwaukee® M18™ Battery
- Ask us about our ex hire tools available for purchase!
View Dimensions
-
RapidPress Extreme Male BSP Coupler
RapidPress Extreme Male BSP Coupler
Features
- FKM Seal
- Male BSP End
- Temperature rating: -20°C, 220°C ...
- Maximum operating pressure: 16 Bar (232psi)
- EPDM and Gas Rated options available
View Dimensions
-
RapidPress Extreme Male BSP Union
RapidPress Extreme Male BSP Union
Features
- FKM Seals
- Male BSP End
- Temperature rating: -20°C, 220°C...
- Maximum operating pressure: 16 Bar (232psi)
- EPDM and Gas Rated options available
View Dimensions
-
RapidPress Pressing Head Case 76.1-108
RapidPress Pressing Head Case 76.1-108
Features
- For RapidPress Pressing Heads & Adapters from 76.1 to 108.0
View Dimensions -
RapidPress Clip Head & 'T' Bracket
RapidPress Clip Head & 'T' Bracket
Features
- To suit RapidPress Press-Fit Tube
- Fasteners included
- Additional sizes available on request
View Dimensions
-
RapidPress Extreme Reducing Tee
RapidPress Extreme Reducing Tee
Features
- FKM Seals
- Reduced diameter centre leg
- Temperature rating: -20°C, 220°C...
- Maximum operating pressure: 16 Bar (232psi)
- EPDM and Gas Rated options available
View Dimensions
-
RapidPress Union FKM Flat Washer
RapidPress Union FKM Flat Washer
Features
- FKM Union Flat Washer - Green
- For use with RapidPress Unions
- For Unions *with* Male BSP or Female BSP ends, please see our RapidPress EPDM M/F Union Flat Washer
View Dimensions
-
FlexiFlow Hose with RapidPress Extreme Couplers
FlexiFlow Hose with RapidPress Extreme Couplers
Features
- **Please allow 1-2 days lead time for fabrication**
- FlexiFlow Stainless Steel Convoluted Braided Hose
- Connections: RapidPress Extreme Couplers (FKM) ...
- Hose Test Standard: ISO 10380-2012
- Hose Designation: TYPE 1-10
- Click 'View Dimensions' for the following information:
- E = Static/Flexing Minimum Bend Radius (mm)
- F = Working/Test Pressure (bar) *Applies to Hose Only, Not End Connections*
View Dimensions
-
RapidPress Bossed Clamp
RapidPress Bossed Clamp
Features
- M10 Boss (17mm long)
- Clamp to suit RapidPress Tube
- Includes Stainless Steel Metric Fasteners ...
- Smaller sizes are available as Saddles
View Dimensions
-
RapidPress Extreme Slip Coupler
RapidPress Extreme Slip Coupler
Features
- FKM Seals
- Temperature rating: -20°C, 220°C
- Maximum operating pressure: 16 Bar (232psi) ...
- EPDM and Gas Rated options available
View Dimensions
-
RapidPress ACO203 15-54 Tool
RapidPress ACO203 15-54 Tool
Features
- *Tool, Battery, Charger and Case only*
- Press sizes from 15.0mm to 54.0mm
- Work light for safe working ...
- Analysis of tool performance via NovoCheck app
- Data transfer via Bluetooth®
- Brushless Motor Technology
- Runs Milwaukee® M18™ Battery
- Ask us about our ex hire tools available for purchase!
View Dimensions
-
RapidPress Extreme Flange Table E
RapidPress Extreme Flange Table E
Features
- RapidPress Extreme Coupler - Green FKM Seal
- Flange Manufactured to AS2129 Table E Standard (*)
- (*) Please note that sizes 22.0x20NB to 42.0x40NB do not meet AS2129 thickness. The thickness has been increased to avoid unacceptable warpage that can occur at standard thickness, as recommended in the standard. These flanges will be denoted as "NON STANDARD"....
- Flange Forged to ASTM A182 (F316L)
- Temperature Rating: -20°C, 220°C
- Maximum Operating Pressure: 16 Bar (232 psi)
View Dimensions
-
RapidPress Extreme Female BSP Coupler
RapidPress Extreme Female BSP Coupler
Features
- FKM Seal
- Female BSP End
- Temperature rating: -20°C, 220°C ...
- Maximum operating pressure: 16 Bar (232psi)
- EPDM and Gas Rated options available
View Dimensions
-
RapidPress Extreme Female BSP Tee
RapidPress Extreme Female BSP Tee
Features
- FKM Seals
- Female BSP Centre Leg
- Temperature rating: -20°C, 220°C...
- Maximum operating pressure: 16 Bar (232psi)
- EPDM and Gas Rated options available
View Dimensions
-
RapidPress Pressing Head Set 76.1-108
RapidPress Pressing Head Set 76.1-108
Features
- Full set of Pressing Heads and Adapters from 76.1-108.0 (excludes 88.9mm Pressing Head)
- Comes with it's own carrying case
- M-Profile
View Dimensions
-
RapidPress Deburrer Tool
RapidPress Deburrer Tool
Features
- Suitable for deburring both pipe/tube internals and externals
- Can be used with Stainless Steel, Copper, Brass, Aluminium, Plastic and more
View Dimensions
-
RapidPress Extreme Female BSP Union
RapidPress Extreme Female BSP Union
Features
- FKM Seals
- Female BSP End
- Temperature rating: -20°C, 220°C...
- Maximum operating pressure: 16 Bar (232psi)
- EPDM and Gas Rated options available
View Dimensions
-
RapidPress Extreme Reducing Coupler
RapidPress Extreme Reducing Coupler
Features
- FKM Seals
- Temperature rating: -20°C, 220°C
- Maximum operating pressure: 16 Bar (232psi) ...
- EPDM and Gas Rated options available
View Dimensions
-
RapidPress Pressing Tool Case Handle
RapidPress Pressing Tool Case Handle
Features
- Replacement Handle for RapidPress Pressing Tool Case (ACO203/ACO203XL)
View Dimensions -
RapidPress M/F Union FKM Flat Washer
RapidPress M/F Union FKM Flat Washer
Features
- FKM Flat Washer - Green
- For use with RapidPress Male BSP Unions and Female BSP Unions
- For standard RapidPress Union Gaskets *without BSP ends* please see our RapidPress FKM Union Flat Washer
View Dimensions
-
RapidPress Bossed Saddle
RapidPress Bossed Saddle
Features
- M10 Boss (17mm long)
- Saddle to suit RapidPress Tube
- Includes Stainless Steel Metric Fasteners ...
- Larger sizes are available as Clamps
View Dimensions
-
RapidPress Extreme Spigot Bend 90°
RapidPress Extreme Spigot Bend 90°
Features
- FKM Seals
- Temperature rating: -20°C, 220°C
- Maximum operating pressure: 16 Bar (232psi)...
- EPDM and Gas Rated options available
View Dimensions
-
RapidPress Depth Gauge
RapidPress Depth Gauge
Features
- Depth Gauge for sizes 15mm to 168.3mm
- To ensure a correctly inserted joint, the tube must be witness marked with a fine-point/felt-tip pen where it meets the fitting using the depth gauge so that full insertion can be verified
View Dimensions
-
RapidPress Rubber Lined Bossed Saddle
RapidPress Rubber Lined Bossed Saddle
Features
- EPDM Liner
- M10 Boss
- To suit RapidPress Tube
View Dimensions
-
RapidPress Inox Press-Fit Tube
EN10312/EN10217-7
RapidPress Inox Press-Fit Tube
EN10312/EN10217-7
Features
- Manufactured to EN10312/EN10217-7
- 180 Grit Finish
- 6 metre lengths. Purchase per metre (enter quantity as '6' for 1 length)
View Dimensions
-
RapidPress Pressing Jaws Handle
RapidPress Pressing Jaws Handle
Features
- Replacement Handle for RapidPress Pressing Jaws (76.1-108.0)
View Dimensions -
RapidPress Clip Head & Hanging Bracket
RapidPress Clip Head & Hanging Bracket
Features
- To suit RapidPress Press-Fit Tube
- Fasteners included
- Hanging Bracket suits M10 ...
- Additional sizes available on request
View Dimensions
-
RapidPress Pressing Heads & Adapters 15-54
RapidPress Pressing Heads & Adapters 15-54
Features
- M-Profile
- Adapter Jaw (AJ4254) required for use of the 42.0mm & 54.0mm Pressing Heads
View Dimensions
-
RapidPress Extreme Spigot Bend 45°
RapidPress Extreme Spigot Bend 45°
Features
- FKM Seals
- Temperature rating: -20°C, 220°C
- Maximum operating pressure: 16 Bar (232psi)...
- EPDM and Gas Rated options available
View Dimensions
-
RapidPress Extreme Union with Tri Clover
RapidPress Extreme Union with Tri Clover
Features
- FKM Seals
- Complete Set including: RapidPress Tri Clover Adapter (x2), Tri Clover Clamp (304) and Tri Clover Seal
- Temperature rating: -20°C, 220°C ...
- Maximum operating pressure: 16 Bar (232psi)
- EPDM options available
View Dimensions
-
RapidPress Extreme 3pc Ball Valve
RapidPress Extreme 3pc Ball Valve
Features
- FKM Seals
- RapidPress Coupler Connections
- Full Port...
- Lockable latch handle
- Temperature Rating: -20°C, 220°C
- Red handle sleeves available for purchase
- EPDM options available
View Dimensions
-
RapidPress Stubbed Clamp
RapidPress Stubbed Clamp
Features
- 16mm Stub (47mm long, 50mm from tube)
- Clamp to suit RapidPress Tube
- Includes Stainless Steel Metric Fasteners
View Dimensions
-
RapidPress Rotary Tube Cutter
RapidPress Rotary Tube Cutter
Features
- Suitable for Stainless Steel, Copper and Aluminium tubing
- Built-in deburrer
- Suitable for sizes from 15mm to 76.2mm
View Dimensions
-
RapidPress Extreme Flange PN10-40
RapidPress Extreme Flange PN10-40
Features
- RapidPress Extreme Coupler - Green FKM Seal
- Flange Manufactured to EN1092-1 PN10/16/40 Type 01/A Standard (*)
- (*) To determine the flange spec, please refer to the end of the code as shown in between stars (RPF28*PN10-40*V). Please note, stars are for visual purposes of this example only....
- Flange Forged to EN10222-5 (1.4404 (F316L))
- Temperature Rating: -20°C, 220°C
- Maximum Operating Pressure: 16 Bar (232 psi)
View Dimensions
-
RapidPress Extreme Male BSP Bend 90°
RapidPress Extreme Male BSP Bend 90°
Features
- FKM Seal
- Male BSP End
- Temperature rating: -20°C, 220°C...
- Maximum operating pressure: 16 Bar (232psi)
- EPDM options available
View Dimensions
-
RapidPress Pressing Tool Case Latching Clips
RapidPress Pressing Tool Case Latching Clips
Features
- Latching Clip to suit RapidPress Pressing Tool Cases (ACO203/ACO203XL) & RapidPress Pressing Jaws Case (76.1-108.0)
View Dimensions -
RapidPress Pressing Heads & Adapters 76.1-108
RapidPress Pressing Heads & Adapters 76.1-108
Features
- M-Profile
- Adapter Jaw (AJ76108) required for use of the 76.1mm & 88.9mm Pressing Head. Also for the initial press for 108.0mm Pressing Head
- Adapter Jaw (AJ108) required for the secondary press for the 108.0mm Pressing Head
View Dimensions
-
RapidPress Inox Press-Fit Tube (WM)
EN10312/EN10217-7
RapidPress Inox Press-Fit Tube (WM)
EN10312/EN10217-7
Features
- WaterMark Approved for use with potable water
- Manufactured to EN10312/EN10217-7
- 180 Grit Finish ...
- Annealed
- 6 metre lengths. Purchase per metre (enter quantity as '6' for 1 length)
View Dimensions
-
RapidPress Ball Valve Handle Extension
RapidPress Ball Valve Handle Extension
Features
- 70mm Handle Extension
- Extend your RapidPress Valve Handle above insulation or hard to reach places
View Dimensions
-
RapidPress Extreme to Male BSP Union with Tri Clover
RapidPress Extreme to Male BSP Union with Tri Clover
Features
- FKM Seals
- Complete Set including: RapidPress to Tri Clover Adapter, BSP Nipple to Tri Clover Adapter, Tri Clover Clamp (304) and Tri Clover Seal
- Temperature rating: -20°C, 220°C ...
- Maximum operating pressure: 16 Bar (232psi)
- EPDM options available
View Dimensions
-
RapidPress Extreme Weld Coupler
RapidPress Extreme Weld Coupler
Features
- FKM Seal
- RapidPress Coupler to Imperial Tube Butt-Weld
- Temperature rating: -20°C, 220°C ...
- EPDM options available
View Dimensions
-
RapidPress Rotary Tube Cutter Blade
RapidPress Rotary Tube Cutter Blade
Features
- Replacement wheel blade to suit the RapidPress Rotary Tube Cutter
- Suitable for Stainless Steel, Copper and Aluminium tubing
- Suitable for sizes from 15mm to 76.2
View Dimensions
-
RapidPress Extreme Male BSP Elbow 90°
RapidPress Extreme Male BSP Elbow 90°
Features
- FKM Seal
- Male BSP End
- Temperature rating: -20°C, 220°C...
- Maximum operating pressure: 16 Bar (232psi)
- EPDM options available
View Dimensions
-
RapidPress Clip Head
RapidPress Clip Head
Features
- To suit RapidPress Press-Fit Tube
- Fasteners included
- Additional sizes available on request
View Dimensions
-
Milwaukee M18 Battery
Milwaukee M18 Battery
Features
- 2.0Ah & 5.0Ah options available for use with our RapidPress Pressing Tools
- (Charger not included)
View Dimensions -
RapidPress Extreme Union with RJT
RapidPress Extreme Union with RJT
Features
- FKM Seals
- Complete Set including: RapidPress to RJT Male Adapter, RapidPress to RJT Female Adapter, RJT Hex Nut (304) and RJT Stepped Seal
- Temperature rating: -20°C, 220°C ...
- Maximum operating pressure: 16 Bar (232psi)
- EPDM options available
View Dimensions
-
RapidPress Extreme Female BSP Elbow 90°
RapidPress Extreme Female BSP Elbow 90°
Features
- FKM Seal
- Female BSP End
- Temperature rating: -20°C, 220°C ...
- Maximum operating pressure: 16 Bar (232psi)
- EPDM options available
View Dimensions
-
Clip Head 'T' Bracket
Clip Head 'T' Bracket
Features
- For use with our Tube Clip Heads and RapidPress Clip Heads
View Dimensions
-
RapidPress Extreme to Male BSP Union with RJT
RapidPress Extreme to Male BSP Union with RJT
Features
- FKM Seals
- Complete Set including: RapidPress to RJT Female Adapter, BSP Nipple to RJT Male Adapter, RJT Hex Nut (304) and RJT Stepped Seal
- Temperature rating: -20°C, 220°C ...
- Maximum operating pressure: 16 Bar (232psi)
- EPDM options available
View Dimensions
-
RapidPress Extreme to RJT Male Adapter
RapidPress Extreme to RJT Male Adapter
Features
- FKM Seal
- RapidPress Coupler to RJT Male Part
- Temperature rating: -20°C, 220°C...
- EPDM options available
View Dimensions
-
Clip Head Hanging Bracket
Clip Head Hanging Bracket
Features
- For use with our Tube Clip Heads and RapidPress Clip Heads
View Dimensions
-
RapidPress Extreme Flange ANSI150
RapidPress Extreme Flange ANSI150
Features
- RapidPress Extreme Coupler - Green FKM Seal
- Flange Manufactured to ASME B16.5 ANSI150 Standard (*)
- (*) Please note that these flanges are Non Hubbed and Flat Faced. These flanges will be denoted as "NON STANDARD". ...
- Flange Forged to ASTM A182 (F316L)
- Temperature Rating: -20°C, 220°C
- Maximum Operating Pressure: 16 Bar (232 psi)
View Dimensions
-
RapidPress Extreme to RJT Female Adapter
RapidPress Extreme to RJT Female Adapter
Features
- FKM Seal
- RapidPress Coupler to RJT Weld Liner & Hex Nut (304)
- Temperature rating: -20°C, 220°C...
- EPDM options available
View Dimensions
-
RapidPress Extreme Female BSP Wing Back
RapidPress Extreme Female BSP Wing Back
Features
- FKM Seal
- Temperature rating: -20°C, 220°C
- Maximum operating pressure: 16 Bar (232psi)...
- EPDM options available
View Dimensions
-
RapidPress Extreme to Tri Clover Adapter
RapidPress Extreme to Tri Clover Adapter
Features
- FKM Seal
- RapidPress Coupler to Tri Clover Ferrule
- Temperature rating: -20°C, 220°C...
- EPDM options available
View Dimensions
-
RapidPress Extreme Female BSP Extended Wing Back
RapidPress Extreme Female BSP Extended Wing Back
Features
- FKM Seal
- Female BSP End
- Temperature rating: -20°C, 220°C...
- Maximum operating pressure: 16 Bar (232psi)
- EPDM options available
View Dimensions
-
RapidPress Extreme to Male Camlock Adapter
RapidPress Extreme to Male Camlock Adapter
Features
- FKM Seal
- RapidPress Coupler to Male Camlock (Type 'TM')
- Temperature rating: -20°C, 220°C ...
- EPDM options available
-
RapidPress Extreme Expansion Compensator
RapidPress Extreme Expansion Compensator
Features
- FKM Seals
- Measurement 'D' signifies the Axial Stroke
- Temperature rating: -20°C, 220°C ...
- Maximum operating pressure: 16 Bar (232psi)
- EPDM options available
View Dimensions
