fbpx

TECHNICAL

Search our Technical Database to find out more about The Metal Company’s products and industry information.
Select a Tag below to refine your search.

Can’t find it here? Contact us and let us know.

The Basics on Schedule Pipe Fittings

All the applicable schedule pipe fittings are manufactured to standard ASME B16.

Schedule pipe typically has a welded seam and is therefore technically non-sanitary. The process to manufacture schedule pipe is referred to as hot rolling which implies rolling stainless steel at high temperatures to form into the desired shape. As the stainless steel cools down the metal can naturally contract, therefore accuracy is difficult to control.

The term NB (Nominal Bore) is often used interchangeably with NPS (Nominal Pipe Size). ‘Nominal’ is a non-dimensional number that identifies the hole diameter. The wall thickness of pipe is determined by the schedule. Pipe fittings are available from The Metal Company in Schedule 10S and Schedule 40S. In the engineering industry, this can also be written or referred to as ‘SCH10’ or ‘S10’ and ‘SCH40’ or ‘S40’.

The Metal Company stock a range of schedule pipe fittings including 45° & 90° bends, concentric & eccentric reducers, end caps, tees, sockolets and threadolets.

Aside from the pipe fittings range, The Metal Company offers professional schedule pipe fabrication and BSP threading. We have nominated welders able to create customised fittings, providing you with a quick and easy installation on site. Customisation can include extended barrel nipples, extended weld nipples and female BSP threading.

Typical industry applications for schedule pipe and fittings include transporting fluids, gases, drainage & services, irrigation, pumping, petrochemical, geothermal, marine, agriculture and on machinery.

About Sockolet and Threadolet fittings

What does RJT stand for?

What does DIN stand for?

What is the difference between RJT and DIN?

About DIN Inch Fittings

What is a Tri Clover union?

Union Maximum Pressure Ratings

C Spanner Basics

Camlock Basics

Camlock Name Calling

Gold vs Silver Camlock Handles

About Our Hosetail Adapters

The Metal Company BSP Thread Adapters

Sizing up Tube

Sizing up Schedule Pipe

What is the difference between A and E Series Butterfly Valves?

How does an Inline Non-Return Valve work?

Advantages of Mini Ball Valves from The Metal Company

What is the difference between a Gate and Globe Valve?

Different types of BSP Non-Return Valves

L Port Valve verses T Port Valve

Types of Flanges at The Metal Company

What is an Expansion Flange used for?

How to measure a Flange

What is the difference between a Clamp and a Saddle Clamp?

How do Bossed Clamps work?

What is the difference between Tube and Pipe?

Imperial (Inches) to Metric (mm) Conversion Table

Schedule 10S and Schedule 40S Pipe Measurements

What is Spiral Welded Tube?

What is the difference between OD and ID tube?

Advantages of Press-Fit Systems

Press-Fit Stainless Steel Specifications

Press-Fit Seal Specifications

Why are BSP Fittings so common in New Zealand?

The Metal Company Flat-Faced BSP Mac Unions

Common Grades of Aluminium

The Tasman (Lightweight) Flange Thickness

About Insertion Rubber Seals

About HNBR Rubber Seals

About Nitrile Rubber (NBR) Seals

About EPDM Rubber Seals

About EPR Rubber Seals

About Silicone Rubber Seals

About Viton Rubber Seals

About Teflon PTFE Rubber Seals

Is Stainless Steel ferrous or non-ferrous?

Is Aluminium ferrous or non-ferrous?

Does Stainless Steel and Aluminium react with each other?

Does Stainless Steel rust?

What temperatures can Stainless Steel withstand?

Can Stainless Steel be welded?

Is Stainless Steel magnetic?

What is Stainless Steel?

About our sight glasses

Ball Lock Gas Fittings

About Liquid Level Gauges

About our Lugged Butterfly Valves

What does RHS, SHS and CHS stand for?

What is a Mikalor Clamp?

What is a NPT Thread?

What is the difference between cast iron and cast steel?

Butterfly Valve diagram and symbol. How do they work?

Types of Butterfly Valves and what type of valve is a Butterfly Valve?

How do you identify BSP Threads?

Is a Tri Clover Union the same as a Tri Clamp Union?

What is a Tri Clamp or Tri Clover Union Ferrule?

What does SPI stand for?

Europress 15, 22, 28 & 35 Press Joint Instructions

Europress 42, 54, 76.1, 88.9 &108 Press Joint Instructions

Possible Causes of Europress System Leaks

Thermal Expansion calculation when installing pipework

Please contact The Metal Company to change your email address. Request change.